Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window repair near me is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However, if you have double pane windows that are anchored by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this instance, you will need to locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you are going attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent water and drafts from entering your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is large, you might think about the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need close your window and do a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze, it may be hinges at fault. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It is essentially a simple procedure, but it is simpler if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window repair in a certain way or due to poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges can also be unbalanced due to wear, creating an opening where the sash meets frame. If they are beyond repair, it might be necessary to have them realigned. The interlock may be unbalanced. This is located on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes filled with some type of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.